基于多级混合澄清槽的PUREX流程的计算模型

主要通过建立分配比模型、化学反应模型、传质模型构建了一套基于混合澄清槽的PUREX流程中关键循环过程的计算模型（mathematical model for main PUREX process based on mixer-settler，简称MPMS），用于计算各级单元的物料浓度。通过检验两组具有代表性的PUREX工艺流程，模拟结果较好地匹配实验数据，表明该计算模型具有良好的精确性。该计算模型将为基于多级混合澄清槽的PUREX流程模拟提供有益帮助。     

How does a bank's involvement interplay with a firm's capacity investment? An analysis and comparison of different consortium structures

As nonrecourse project finance (rather than financing on a sovereign basis) is becoming more prevalent worldwide, financing institutions have to collaborate more closely with firms to optimize capacity‐investment and financing decisions. Under this background, this paper presents a stylized Stackelberg games model, taking into account the firm's capacity investment as well as the bank's interest rate and funding ratio decisions. Consortium structures between bank and firm are formalized into five modes based on industry practice, namely, the integrated consortium, pure shareholder funding, bank as leader, full coordination, and bank as follower. The optimality and equilibrium of each of the five modes are analytically derived, and their existence and uniqueness are demonstrated. Valuable economic insights are obtained through both modeling analysis and numerical experiments, with the main findings including the following: (i) a lack of bank financing leads to insufficient capacity investment and poor consortium performance; (ii) interest rate and funding ratio play important but different roles in the bank's risk management; (iii) the bank's proactivity in leading and coordinating the consortium is critical for the two parties’ overall performance; and (iv) if the bank is the follower, the firm's capacity decision is irrelevant to the bank's loan contract, and the consortium cannot be coordinated to the first‐best level of performance.     

水平衡法与高温转化法在矿泉水氢氧稳定同位素测定中的应用

为了鉴别不同品牌矿泉水标注水源地信息真伪,对11种不同品牌饮用水的氢氧稳定同位素(δD和δ18 O)进行测定。结果表明,水平衡法(GasBench-IRMS)和高温转化法(TC/EA-IRMS)的测定结果一致性较好,两种方法测定6种不同饮用水的δD和δ18 O的平均差异分别为(0.6±1.59)‰和(0.02±0.13)‰。水平衡法需要较长的制备和测定时间,但δD和δ18 O的测定精度明显优于高温转化法。11种饮用水δD和δ18 O变化范围较大,其δD和δ18 O受不同品牌饮用水的水源地降水影响形成明显的地域性。虽然无法区分矿泉水是否由其他类别饮用水伪造,但δD和δ18 O可以为特定区域(如高海拔与沿海地区)以及产地相近的矿泉水水源地鉴别提供依据。     

A hidden Markov model to detect regime changes in cryptoasset markets

The objective of this work is to understand the dynamics of cryptocurrency prices. Specifically, how prices switch between different regimes, going from “bull” to “stable” and “bear” times. For this purpose, we propose a hidden Markov model that aims at explaining the evolution of Bitcoin prices through different, unobserved states. The implementation of the proposed model includes a likelihood ratio test that allows to compare models with different states and with different covariance structures. Our empirical findings show that the time movements of Bitcoin prices across different exchange markets are well-described by the proposed model. In particular, a parsimonious model with a diagonal covariance matrix leads to better predictions, compared with a model with a full covariance matrix.     

一种低信噪比环境下的语音端点检测算法

端点检测技术是语音信号处理的关键技术之一，为提高低信噪比环境下端点检测的准确率和稳健性，提出了一种非平稳噪声抑制和调制域谱减结合功率归一化倒谱距离的端点检测算法。该算法首先通过抑制非平稳噪声再采用调制域谱减消除残余噪声来提升信噪比，减少语音失真。然后再提取每帧信号的功率归一化倒谱系数，计算每帧信号与背景噪声的功率归一化倒谱距离。最后将该倒谱距离作为检测参数，采用双门限判决方法进行端点检测。实验结果表明，该端点检测算法对语音帧和噪声帧具有较好的区分性。此外，在低信噪比环境下，所提出的算法对于不同类型的噪声都具有较好的稳健性。     

车门内饰板优化分析及模具设计

利用CAE分析软件Moldex3D先找出整个设计是否存在缺陷,为了增加优化效率,采用田口实验设计法规划控制因子与配置。L9(34)直交表来求得成型条件的最佳化参数组别,观察结果并找出最佳成型条件,以降低成型后所发生的体积收缩率以及翘曲位移量。由S/N因子反应表可看出对于Z轴变形量在塑料温度209℃、保压时间11.025 s、冷却时间17.85 s时较优良。Z轴的翘曲从1.64 mm降低到1.04 mm,整体改善了36.5%,最终根据优化结果进行了模具设计。     

摩擦副表面气膜屏蔽微细电解加工微织构及摩擦性能分析

采用气膜屏蔽微细电解加工方法在金属平面副、圆柱副表面加工不同阵列形貌微织构。通过试验将该方法与微细电解加工的微织构尺寸精度、表面质量、摩擦性能进行对比，研究结果表明，气膜屏蔽微细电解加工的微织构相比微细电解加工方法加工的微织构平面副及圆柱副凹槽深径比分别提高了约45.6%和25.8%，改善了加工的定域性，提高了加工精度。进一步的摩擦磨损试验结果表明，相较于微细电解加工方法，气膜屏蔽微细电解加工出的平面副及圆柱副微凹槽的表面摩擦因数分别减小了13.6%与16.2%，表面摩擦性能得到了提高。     

双轮式抛投机器人仿富勒烯轮毂结构设计

为了提高双轮式抛投机器人的全向抗冲击性能，提出了一种仿富勒烯张拉式轮毂结构及其优化方法。首先，根据C₆₀的几何特点及正二十面体被截取顶角后的截取比例λ建立模型，利用直接刚度矩阵法对模型进行受力分析，给出了最优截取比例λ。然后，以张拉结构为载荷分布优化单元对C₆₀结构载荷分布进行优化，并对其静力学性能进行了ABAQUS仿真分析，最后将其与同质量的条幅式、轮辐式以及球壳式轮毂结构进行对比。仿真结果表明:所提出的仿C₆₀张拉结构轮毂具有较好的强度及刚度特性，整体承载性能较优；具有较好的承载与散力特性，应力分布较为均匀；同时具有较好的承载全向性，结构受力整体性好且不易失稳，从而验证了所设计结构的有效性。     

预浸出对硫化铜精矿硫酸化焙烧处理的影响

采用硫酸化焙烧-浸出-电积工艺来处理硫化铜精矿时增加预浸出可以使得铜浸出率增加，焙砂浸出液中影响铜电积的主要杂质元素Fe、Mn、Co等含量降低，预浸出段酸矿比0.3:1、温度50 ℃、时间3 h、液固比1:1时，Cu的最终浸出率大于99%，焙砂浸出液中Fe、Mn含量分别为0.12g/L和0.005g/L。通过预浸出段正交试验，确定了酸矿比对各个元素的浸出率影响最大，当酸矿比0.6:1，温度70 ℃，时间2 h，液固比1:1时，Fe的渣计浸出率为93.61%，Mn的渣计浸出率为59.50%，Mg的渣计浸出率为32.97%。